42
¢¢
Initialize Data
¢¢
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Returning to Initial Settings
The initial (factory) settings can be restored when, for example, mistakes have been made
in the settings in the respective mode.
<Note>
When an option card is being used, the Option Card Set sub-menu does not return to the
initial settings even if the “return to initial settings” operation is performed.
1.
Select Initialize Data on the main menu
for the selected mode, and press the
YES/ABC switch. The Initialize Data
sub-menu screen shown on the right
will now appear for about 10 seconds.
2.
Once the Initialize Data sub-menu
screen has appeared, press the
YES/ABC switch within 10 about
seconds to initialize the settings. A
message is then displayed on the
screen such as the one shown in
2
,
and operation returns to the main
menu.
3.
If, after the Initialize Data sub-menu
screen has appeared, the NO/BAR
switch is pressed or the YES/ABC
switch is not pressed within 10 about
seconds, a message such as the one
shown in
3
will be displayed on the
screen, and operation will return to the
main menu without initializing the
settings.
Initialize Data sub-menu
The mode selected is displayed here.
1
2
Halogen Mode
Initialized
3
Halogen Mode
unchanged
Содержание AWE300SP - COLOR CAMERA
Страница 1: ...OPERATING INSTRUCTIONS ...