Panasonic AWE300SP - COLOR CAMERA, Руководство по эксплуатации

Страница: 90 / 97

40 (E)
ENGLISH
Menu Item Settings and Changes
(in user mode)
h Colour matrix compensation level adjustment
[Matrix (R-G), (R-B), (G-R), (G-B), (B-R), (B-G): –31 to +31]
These are for adjusting the colour matrix compensation.
(R-G) : The colours between red and magenta are toned up or down.
(R-B) : The colours between red and yellow are toned up or down.
(G-R) : The colours between green and cyan are toned up or down.
(G-B) : The yellowish green colour is toned up or down.
(B-R) : The colours between blue and cyan are toned up or down.
(B-G) : The purple colour is toned up or down.
i
Gamma correction level setting [Gamma: 0.35 to 0.55]
This enables the gamma correction level to be set.
j Knee compensation level setting [Knee Point: 88% to 98% or dynamic]
88% to 98%:
The level of the knee-compensated video signals can be set (knee point).
Dynamic:
The knee compensation level is automatically adjusted to match the light quality.
k White clip level setting [White Clip: 95% to 110%]
The peak level of the white-clipped video signals can be set.
l
Flare compensation level adjustment [Flare R/G/B: 0 to 100]
These enable the flare compensation level to be adjusted.
<Note>
The flare compensation level is set prior to shipment.
m Black stretch selection [Black Stretch: ON or OFF]
This makes it possible to set the black stretch which compensates for blacking-out under
low-brightness conditions to ON or OFF.
n Clean DNR selection [Clean DNR: HIGH, LOW or OFF]
This enables the clean DNR effect to be selected.
o PC control communication speed selection
[Baud Rate: 1200, 2400, 4800 or 9600 bps]
This is for selecting the baud rate at which the camera is to be controlled from a
computer.
p
Negative/positive selection [Nega/Posi: Posi or Nega]
Posi : Normal images.
Nega : Images whose light and dark sections and colours are reversed.
<Note>
Negative images are shown only for composite outputs and Y/C outputs when the option
cards are used.