Panasonic AWE300SP - COLOR CAMERA, Руководство по эксплуатации

Страница: 75 / 97

25 (E)
Camera’s colour
bars
Split line
Colour bars of
special effects unit
Adjustments
Colour phase adjustment
Align the camera’s colour phase to the reference colour tones such as the programme
output (colour bar output which has been split) of a colour special effects unit.
Adjusting the colour phase with the vectorscope makes it possible to obtain an even
finer adjustment.
1
Hold down the NO/BAR switch for at
least 5 seconds or so, and set to
colour bars.
2
Select “SC coarse” for the genlock
colour bar setting on the sub-menu,
and use the YES/ABC switch or
NO/BAR switch to perform the coarse
adjustment.
3
Select “SC fine,” and use the
YES/ABC switch or NO/BAR switch to
adjust finely so that the colour phase
is brought into alignment.
When performing the adjustment
using the camera
Use the “subcarrier phase coarse adjustment switch” and “subcarrier phase fine
adjustment control” to perform the adjustment.
<Note>
When adjusting the colour phase from the RCU (RCB), set the BAR/CAM switch to BAR
before performing the adjustment.
The colour phase cannot be adjusted if this switch is set to CAM.
Upon completion of the adjustment, be absolutely sure to return the BAR/CAM switch to
CAM.
When performing the adjustment
using the RCU (RCB)
White Yellow Cyan Green Magenta Red Black Blue
White Yellow Cyan Green Magenta Red Black Blue