![background image](http://html1.mh-extra.com/html/panasonic/aw-ue70wp/aw-ue70wp_operating-instructions-manual_3933051073.webp)
73
Web screen configurations
(continued)
The range of H.264 bit rates that can be specified varies
depending on the resolution.
[When 59.94 Hz has been set as the unit’s frequency]
Image capture
size
Frame rate
H.264 bit rate
3840×2160
30fps
51200kbps fixed
15fps
40960kbps fixed
5fps
32768kbps fixed
1920×1080
60fps
16384kbps to 24576kbps
1920×1080
5fps, 15fps,
30fps
3072kbps to 14336kbps
1280×720
60fps
3072kbps to 14336kbps
1280×720
5fps, 15fps,
30fps
2048kbps to 8192kbps
640×360
5fps, 15fps,
30fps
1024kbps to 4096kbps
320×180
5fps, 15fps,
30fps
512kbps to 4096kbps
[When 50 Hz has been set as the unit’s frequency]
Image capture
size
Frame rate
H.264 bit rate
3840×2160
25fps
51200kbps fixed
12.5fps
40960kbps fixed
5fps
32768kbps fixed
1920×1080
50fps
16384kbps to 24576kbps
1920×1080
5fps, 12.5fps,
25fps
3072kbps to 14336kbps
1280×720
50fps
3072kbps to 14336kbps
1280×720
5fps, 12.5fps,
25fps
2048kbps to 8192kbps
640×360
5fps, 12.5fps,
25fps
1024kbps to 4096kbps
320×180
5fps, 12.5fps,
25fps
512kbps to 4096kbps
Image quality
Select the image quality for H.264 images.
Setting value:
Motion priority
Mode giving priority to image motion.
Image quality
priority
Mode giving priority to image quality.
Factory settings:
Motion priority
●
This setting is only enabled when [Transmission
priority] is set to [Constant bit rate] or [Best effort].
Note
Transmission type
Select the transmission format for H.264 images.
Setting value:
Unicast port
(AUTO)
Up to 14 users can access a single camera at
the same time.
[Unicast port (Image)] and [Unicast port
(Audio)] will be configured automatically when
images and audio are sent from the camera.
We recommend selecting the [Unicast port
(MANUAL)] setting when the port number
transmitting the H.264 images does not need to
be fixed (e.g., during use within a network).
Unicast port
(MANUAL)
Up to 14 users can access a single camera at
the same time.
[Unicast port (Image)] and [Unicast port (Audio)]
must be configured manually when images and
audio are sent from the camera.
When transmitting H.264 images via the
Internet, configure a fixed transmission port for
the broadband router (hereafter referred to as
“router”) (page 93). For details, refer to the
operating instructions for the router.
Multicast
An unlimited number of users can access a
single camera at the same time.
When transmitting H.264 images via multicast,
enter the [Multicast address], [Multicast port],
and [Multicast TTL/HOPLimit].
Factory settings:
Unicast port (AUTO)
●
For details on the maximum number for
simultaneous access, see page 58.
Note
Содержание AW-UE70WP
Страница 143: ...143 Memo ...
Страница 144: ...Web Site http www panasonic com Panasonic Corporation 2015 ...