![background image](http://html1.mh-extra.com/html/panasonic/aw-ue70wp/aw-ue70wp_operating-instructions-manual_3933051082.webp)
82
Web screen configurations
(continued)
●
When “Low” or “High” is selected, the following
settings cannot be changed.
•
Auto Shutter Limit
•
ND Filter
•
Day/Night
•
Night-Day Level
•
Pedestal
•
DRS
•
Gamma Type
•
Back Light COMP.
•
Freeze During Preset
●
When “Low” or “High” is selected, the OSD menu
cannot be displayed for the video on the Web
screen. However, the OSD menu can be displayed
over video output to a monitor.
●
If you attempt to display the OSD menu on the Web
screen when “Low” or “High” is set, the HDR item
becomes bar display and the setting cannot be
changed. Change the setting from the Web setting
screen, infrared remote control, etc.
●
When the Priority Mode (page 46, page 67) is
“IP” mode and when HDR is set to “Low” or “High”,
there are the following restrictions.
•
JPEG(1) to (3): Fixed to 640×360.
•
H.264(1): 1280×720 cannot be used.
•
H.264(2) to (4): Cannot be used.
●
When the Priority Mode (page 46, page 67)
selection is “IP(4K)”, “SD card(4K)”, “USB(4K)”, or
“HDMI(4K)”, the HDR is automatically switched to
“Off”.
●
When the OIS (page 49, page 88) selection
is “Mode2”, changing the HDR setting to “Low” or
“High” automatically switches the OIS setting to
“Mode1”.
Notes
DNR
Set here is the level of the digital noise reduction effect so
that light, noise-free and clear images will be output even
at night and in other low-brightness environments.
When “Low” or “High” is selected, noise can be eliminated.
However, there is an increased possibility that afterimages
may occur.
Setting value:
Off, Low, High
Factory settings:
Low
Pedestal
This item is used to adjust the black level (adjust the
pedestal) so that the dark parts of the images are easier
to see.
These parts become darker when a negative setting is
selected and, conversely, lighter when a positive setting is
selected.
Setting range:
–10 to +10
Factory settings:
0
DRS
Set here is the DRS function which provides just the right
amount of compensation when images with significant
light/dark differences are displayed.
When “Low” or “High” is selected, the effect is enhanced
even more.
Depending on the shooting conditions, however, the
picture quality may drop with increased noise.
Setting value:
Off, Low, High
Factory settings:
Off
Gamma Type
Selected here is the type of gamma curve.
Normally, the “Normal” setting is used.
When “Cinema” is selected, images giving off an
atmosphere like movies can be shot.
Setting value:
Off, Normal, Cinema
Factory settings:
Normal
Gamma Level
This item is used to adjust the gamma compensation level.
This is enabled when Gamma Type is set to “Normal”.
When “Low” is set, the images appear sedate and
composed. The resulting gamma curve has a gentle
gradient in the low-brightness areas, and the contrast is
sharper.
Conversely, when “High” is set, the tonal range in the dark
area is expanded so that the images take on a lighter
tone. The resulting gamma curve has a sharp gradient in
the low-brightness areas, and the contrast is softer.
Setting value:
Low, Mid, High
Factory settings:
Mid
Back Light COMP.
“Off” or “On” is set here for the backlight compensation
function.
Under backlight conditions, the function prevents
darkening as a result of light striking the backs of subjects,
and makes it possible to shoot images in shade or shadow
more brightly.
Factory settings:
Off
●
The function takes effect when “Auto” has been
selected as the Contrast Mode, Gain or Frame Mix
item setting.
●
When Day/Night is set to “Auto”, this is set to “Off”.
●
When HDR is set to “Low” or “High”, this is set to
“Off”.
Notes
Содержание AW-UE70WP
Страница 143: ...143 Memo ...
Страница 144: ...Web Site http www panasonic com Panasonic Corporation 2015 ...