40
Iris adjustments
FUNCTION
FOCUS
IRIS GAIN WHITE BAL
PUSH AUTO
OFF
L
M
H
A
M
∞
IRIS dial
IRIS button
1
Press the IRIS button to switch how to
adjust the aperture of lens.
AUTO IRIS:
Adjust the iris automatically.
MANUAL IRIS:
Adjust the iris manually.
2
Turn the IRIS dial to adjust the aperture of
lens when in the manual iris mode.
• In the auto iris mode, the lens iris can be
corrected using this dial.
• Set the direction of the IRIS DIAL and aperture
control in the setup menus, SW MODE screen,
IRIS DIAL. (Page 54 of Vol.2)
• Depending on your lens, AUTO IRIS may not
operate.
• Depending on your lens, the CLOSE function
may not work during the IRIS operation.
• Depending on your lens, for example if you are
using a mount adaptor, the IRIS dial may not
operate. Operate the IRIS ring of the lens.
• See the display on the IRIS METER display
for the status of the light intensity. For details
on the IRIS METER display, see page 47 of
Vol. 2.
Using focus assist
IN RED
1
Assign IN RED to any of the USER 1 – 3
buttons in the menu SW MODE screen.
2
Press the button assigned USER SW.
The contours of the image is taken in the red
outline. Adjust the focus so that the subject to
focus is surrounded by the red outline.
EXPAND
1
Assign EXPAND to any of the USER 1 – 3
button in the menu SW MODE screen.
2
Press the button assigned USER SW.
The center of the screen displayed on the LCD
monitor is enlarged. The screen border of the
LCD monitor turns blue in enlarged view.
• Only four items are displayed on the screen:
the counter, audio level meter, zoom value,
and focus value. The message or information
is not displayed.
• When you press the START/STOP button
while the enlarged view is operating, the
previous screen returns, and the enlarged view
is disabled while recording.
• The enlarged view is disabled while displaying
the menu.
• The enlarged view is disabled while displaying
the color bar.
• The enlarged view is disabled while operating
the REC CHECK function.
• The enlarged view is disabled while operating
the AREA function using the FUNCTION knob.
• The zebra pattern, marker, and safety zone
are not displayed while the enlarged view is
operating.
• When you press the DISP/MODE CHK button
while the enlarged view is operating, the
enlarged view is set to OFF.
• The WFM function is disabled while the
enlarged view is operating,
• IN RED function and EXPAND function do not
work at the same time.
Basic operations of the camera (continued)
Содержание AVCCAM AG-AF100AP
Страница 51: ...Memo 51 ...