Panasonic AVCCAM AG-AF100AP Скачать руководство пользователя

Страница: 16 / 52

Precaution for use

Always take some trial shots before actual shooting.

• When shooting important events (such as weddings), always take some trial shots and check that the

sound and images have been recorded properly before actual shooting.

Be sure to check and set the calendar and time zone.

• These settings affect the control and playback sequence of the recorded contents. Before making a

recording, set and check the calendar and time zone. (Page 33)

Panasonic makes no guarantees for your recordings.

• In the event of failed recording due to a fault related to this camera or to the SD/SDHC/SDXC memory

card, please understand that no compensation can be provided.

Respect copyrights

• Copyright laws forbid the use of video and audio material you have recorded for any purpose other than

your own personal enjoyment. Remember that restrictions apply to the shooting of certain material even
if it is intended for private use.

Caution regarding laser beams

• The MOS sensor may suffer damage if the lens is subjected to light from a laser beam. Ensure that laser

beams do not strike the lens when shooting in an environment where laser devices are used.

Media that can be used in this unit

• SD/SDHC/SDXC memory cards can be used. See page 12 for details.

Mounting the camera-recorder on a tripod

• The tripod mounting hole supports 1/4-20UNC and 3/8-16UNC screws. Please use this in according to

the fixing screw on the tripod.

• The depth of the tripod mounting hole is 5.5mm. Avoid applying excessive force to the tripod screws

when mounting the camera onto a tripod.

Attach the tripod to the tripod hole on the bottom side.

Содержание AVCCAM AG-AF100AP





















































Результаты поиска

Содержание AVCCAM AG-AF100AP

Отзывы:

Похожие инструкции для AVCCAM AG-AF100AP

Бренды по названию

Популярные бренды

Panasonic AVCCAM AG-AF100AP, Руководство по эксплуатации

Результаты поиска

Содержание AVCCAM AG-AF100AP

Отзывы:

Похожие инструкции для AVCCAM AG-AF100AP

Бренды по названию

Популярные бренды