Panasonic AVCCAM AG-AF100AP, Руководство по эксплуатации

Страница: 30 / 52

30
Using the LCD
1
Set the POWER switch to ON.
(Page 27)
2
Open the LCD monitor.
• The monitor opens to an angle of 90
degrees. The camera may be damaged by
attempting to open it further than this.
3
Position the LCD monitor where it is easiest
to see.
• The monitor can be rotated 180° toward the
lens and 90° toward you.
• Do not apply unnecessary force to the
open LCD. This can damage the camera.
• Ensure the LCD is fully closed.
• Operation status displays during self-portrait
recording
No display: Cannot record (no card, etc.)
: Recording in progress, during transition
to the recording pause mode
: Recording paused (recording standby)
: Warning display
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewfinder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1
In CAM mode, press EVF DTL button.
“EVF DTL ON” appears on the screen for about
2 seconds.
MENU
START/
STOP 2
PUSH-ENTER
MODE
POWER DISP/
MODE CHK USER 1
USER 2
FUNCTION
FOCUS
IRIS GAIN WHITE BAL
B
MEGA
ON
OFF
O.I.S.
CAM ON
CH1
CH2
AUDIO LEVEL
..
OFF
PB
+ –
AUDIO MON
BARS
EVF DTL CH1 SEL
INT(L)
ON
OFF
ON
OFF
INPUT1
AUDIO
MIC POWER +48V
INPUT1 INPUT2
INPUT2
INPUT1
INPUT2
CH2 SEL
WFM
COUNTER-RESET/TC SET
ZEBRA OIS
EXEC
A
PRST
L
M
H
A
M
∞
POWER FOCUS ..
BARS
EVF DTL CH1 SEL
INT(L)
ON
OFF
ON
OFF
INPUT1
AUDIO
MIC POWER +48V
INPUT1 INPUT2
INPUT2
INPUT1
INPUT2
CH2 SEL
WFM
COUNTER-RESET/TC SET
ZEBRA OIS
EVF DTL button
Press EVF DTL button again to return to the
original display. “EVF DTL OFF” appears on the
screen for about 2 seconds.
Viewfinder (continued)