A
I
J
K
L
M
B
C
D
H
G
E
F
A. Setting target selection list box [Master ROP Number]
B. CAMERA NO column [CAMERA NO]
C. CAMERA TYPE column [CAMERA TYPE]
D. CAMERA MODEL column [CAMERA MODEL]
E. MAC ADDRESS column [MAC ADDRESS]
F. IP ADDRESS column [IP ADDRESS]
G. CAMERA PORT NO column [CAMERA PORT NO]
H. SWAP CAMERA column [SWAP CAMERA]
I. NETWORK SEARCH button [NETWORK SEARCH]
J. REFRESH button [REFRESH]
K. SET button [SET]
L. CANCEL button [CANCEL]
M. INITIALIZE (FACTORY SETUP) button [INITIALIZE(FACTORY SETUP)]
Setting Procedure
1. Select the ROP for which you want to configure the connection settings.
Click of [Master ROP Number] (A) to display a list of the IP addresses of ROP units that can be set. From the list, select the ROP
whose IP address you want to set.
Any of the units registered on the [ROP List] tab can be selected.
2. Update the [Camera List] tab display.
Click the [REFRESH] button (J) to retrieve the connection information for the ROP set in [Master ROP Number] (A) to the personal
computer and update the [Camera List] tab display.
3. Configure the connection settings.
Connection setting information is displayed for the ROP selected in step 1.
Configure the settings for the required items.
- 127 -
Software
