Panasonic AK-HC3500AES, Руководство по эксплуатации

Страница: 34 / 48

34
Table of adjustment setting ranges
Operation
Menu Item Adjustment setting range Initial value Items recorded on SD memory cards
VF Setting1
Side Modu SW OFF, ON OFF

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Side Modu LVL 0 to 31 31

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Zone Mark
OFF, 4:3, 13:9, 14:9, 15:9, 16:9,
CINEMA, VISTA
OFF

No switching from the SD memory
card to the camera settings possible
while the buildup unit is connected.
Safety Mark1 16:9, 15:9, 14:9, 13:9, 4:3, OFF OFF 
Safety Area1 80 %, 90 %, 93 %, 100 % 80 % 
Safety Mark2 16:9, 15:9, 14:9, 13:9, 4:3, OFF OFF 
Safety Area2 80 %, 90 %, 93 %, 100 % 93 % 
Center Mark OFF, ON OFF 
Center Mark SEL 1 to 8 1 
Line Width 1 to 3 2 
Marker Level 100 %, 75 %, 50 % 100 % 
VF Setting2 VF DTL 0 to 23 10 
RET Signal
HD Peak FREQ
Low, Mid, Hi Mid 
HD Offset Gain 0 to 5 0 
HD Crisp 0 to 63 0 
D1 Peak FREQ 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 6.8M 
D1 Offset Gain 0 to 5 0 
D1 Crisp 0 to 63 0 
VBS Peak FREQ 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 6.8M 
VBS Offset Gain 0 to 5 0 
VBS Crisp 0 to 63 0 
Cursor Cursor OFF, ON OFF 
Cursor Memory ADJ, 1, 2, 1+2 ADJ 
H Position 0 to 255 127
V Position 0 to 255 127
Width 0 to 255 127
Height 0 to 255 127
BOX/CROSS BOX, CROSS BOX
Store Memory MEM1, MEM2 MEM1
EXECUTE NO?, YES?
VF Display1 F Number OFF, ON OFF 
Zoom OFF, ON OFF 
Focus OFF, ON OFF 
Extender OFF, ON OFF 
MONI OUT OFF, ON OFF 
Filter OFF, ON OFF 
M Gain OFF, ON OFF 
Shutter OFF, ON OFF 
5600K OFF, ON OFF 
Audio Level OFF, ON OFF 
VF Display2 OPT Level OFF, ON OFF 
RET Select OFF, ON OFF 
Status OFF, ON OFF 
Status(AUTO) OFF, ON OFF 
Field Rate OFF, ON OFF 
Voltage OFF, ON OFF 
WFM (*1) OFF, ON OFF 
White CH OFF, ON OFF 
Setting1 FAN Power OFF, ON, AUTO ON
FAN Mode LOW, NORM NORM
CALL+R_TALLY OFF, ON OFF 
CALL+T_TALLY OFF, ON OFF 
PinP Mode — —
*1: Waveforms are displayed as a single line at the centre of the screen. They appear at the bottom right when the aspect ratio is set
to 16:9, but when an aspect ratio of 4:3 is set on the viewfinder or when the side panel mode is selected by the down-converter, the
waveform display will be cut off in part.