77
5
5-7
Attaching the Shoulder Strap
To detach the shoulder strap, first open the hooks, then detach
the strap.
<Note>
Make sure that the shoulder strap is securely attached.
5-8
Attaching the Rain Cover
When using the SHAN-RC700 Rain Cover
5-9
Connecting the AJ-EC3P
Extension Controller
Some functions can be remote-controlled when the AJ-EC3P
extension control unit (optional) is connected to the camera.
When the AJ-EC3P is connected, the camera automatically
enters remote control mode after the power switches of both the
camera and the AJ-EC3P are turned ON.
<Notes>
z
Be sure to turn OFF both the camera and the AJ-EC3P power
switches before connecting or disconnecting the controller
cable.
z
If ECU DATA SAVE is set to OFF, the camera-related setting
values, which have been adjusted or set using the AJ-EC3P,
will be cancelled when the camera power switch is turned
OFF. Also, the setting values cannot be written to an SD
memory card. However, the menu settings performed using
the AJ-EC3P can be written to an SD memory card. Next time
the AJ-EC3P is connected, the setting values will return to the
AJ-EC3P settings.
ECU DATA SAVE can be selected from the <SW MODE>
screen on the CAM OPERATION page.
z
If ECU DATA SAVE is set to ON, the values adjusted or set
using the AJ-EC3P are retained, even after the camera power
switch is turned OFF.
z
The USER switch on the camera does not function when the
AJ-EC3P is connected.
z
When controlling the shutter from the AJ-EC3P, the shutter
speeds correspond to the speeds set by the menu on the
camera, not the speeds written on the AJ-EC3P. The shutter
speeds correspond as follows:
Press to open
the hook.
Shoulder Strap
Tighten the cord
Secure with the
surface fastener
Secure with the surface fastener
AJ-EC3P
Shutter Speed Indication
Camera Shutter Speeds
100 (60)
POSITION1
120
POSITION2
250
POSITION3
500
POSITION4
1000
POSITION5
2000
POSITION6
AJ-
w
Controller Cable
ECU Connector
AJ-EC3P
#,52:2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ
