28
Introduction: Control Reference Guide
PF1 button
In recording/playback mode, press this button after
pressing the PF button to start the setup menu
operation registered in the PF1 button.
13.
TRIM – /SLOT SELECT – button
SLOT SELECT – (SHIFT + TRIM –) button
Hold down the SHIFT button and this button
simultaneously to move to the previous recording slot
position. Pressing this button when the unit is in slot 1
results in a move to slot 6.
TRIM – button
Use this button to move to a hard disk partition.
➝
Refer to “Displaying Clip Thumbnails on a Hard Disk”
(page 125).
Use this function for trimming.
➝
Refer to “Buttons Used in Playlist Operations” (page
86).
14.
ENTRY/CLIP
➝
LIST/PF2 button
ENTRY button
During clip playback or control of an external device,
press the IN or OUT button simultaneous with this
button to set an IN or OUT point.
CLIP
➝
LIST (SHIFT + ENTRY) button
Clip load function
➝
Refer to “Buttons Used in Playlist Operations” (page
86).
PF2 button
In recording/playback mode, press this button after
pressing the PF button to start the setup menu
operation registered in the PF2 button.
15.
TRIM + /SLOT button
SLOT (SHIFT + TRIM +) button
Hold down the SHIFT button and this button
simultaneously to move to the previous recording slot
position. Pressing this button when the unit is in slot 6
results in a move to slot 1.
TRIM + button
Use this button to move to a hard disk partition.
➝
Refer to “Displaying Clip Thumbnails on a Hard Disk”
(page 125).
Use this button for trimming.
➝
Refer to “Buttons Used in Playlist Operations” (page
86).
16.
OUT/ALL CLIP/PF3 button
OUT button
Use this button to perform the following functions
during clip playback or when the unit is controlled
externally.
• OUT + ENTRY
Press the ENTRY button and this button to set an
OUT point.
• OUT
Press this button to confirm a set OUT point. “--:--:--
:--” is displayed when no point has been set.
• OUT + RESET
Press the RESET button and this button
simultaneously to delete the current OUT point.
• OUT + GOTO
Press the GOTO button and this button
simultaneously to cue up to the set OUT point.
ALL CLIP (SHIFT + OUT) button
In the thumbnail screen, press the SHIFT button and
this button simultaneously to return the clip display to
ALL.
PF3 button
In recording/playback mode, press this button after
pressing the PF button to start the setup menu
operation registered in the PF3 button.
17.
PREVIEW/A LEVEL REC button
PREVIEW button
Press this button to preview (playback from the IN
point of set preroll time to 1 sec past the OUT point)
footage edited in play list mode.
➝
Refer to “Buttons Used in Playlist Operations” (page
86).
A LEVEL REC (SHIFT + PREVIEW) button
Adjust level of audio tracks.
➝
Refer to “Buttons Used in Playlist Operations” (page
86).
Use this button to preview playback of event that is
being registered. Before the preview, the event is
registered and appears on the time line. When the
player is a P2 card, any level changes made using the
audio level control during preview when registering an
event are recorded.
➝
Refer to “Setting Audio Level” (page 109).
