Panasonic AJ-HPD2500, Руководство по эксплуатации

Страница: 169 / 226

Setup: Item Settings
169
Se
tup
Item Settings
The system menu specifies HD SDI and SD SDI outputs, analog composite output, phase adjustment of audio output, system
frequency, phase of SD REF input of HD SDI output, and system file lock.
• XX indicates factory default settings.
SYSTEM
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
05 ENCODER SEL
0001
0002
LOCAL
BOTH
Determines whether video output signal adjustments will be made on this unit or on an
external encoder remote controller.
LOCAL: Video output signal adjustments are performed on this unit.
BOTH: Video output signal adjustments are either performed on this unit or on an encoder
remote controller.
NOTE:
• An RS-422A digital controller is available as an encoder remote controller.
• For details on adjustments, refer to “Video Output Signal Adjustments” (page 171).
• When adjustments are made on an external encoder remote controller, the
adjustment values are reflected to adjustment parameters in setup menus. Note that
it takes 1 min after completing adjustments for values reflected to adjustment
parameters to be saved. Thus when adjustments using an external encoder remote
controller are completed, wait 1 minute or more before turning off the unit.
12 SYS H(HD)
0000
|
1375
|
2750
–1375
|
0
|
1375
Adjusts system phase of a HD SDI output (in 13.5 ns steps).
–: Advances the phase.
+: Delays the phase.
NOTE:
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
14 SYS SC(SD)
0000
|
0128
|
0255
–128
|
0
|
127
Adjusts the system phase of the analog composite output and SD SDI output (total
variable range: ±180°).
NOTE:
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
15 SYS H(SD)
0000
|
0864
|
1728
–864
|
0
|
864
Adjusts system phase of analog composite output and SD SDI output (in 37 ns steps).
–: Advances the phase.
+: Delays the phase.
NOTE:
• A reset does not return this setting to its factory default.
• An item that flashes can be returned to its factory default by pressing the RESET
button.
18 SCH COAR(SD)
0000
0001
0002
0003
0
90
180
270
Adjusts the SCH phase of analog composite output (four 90° positions).
Changes the SC phase but not the H phase.
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only