Editing: Setting Audio Level
111
Ed
it
in
g
6
Check audio level by performing a review or playlist
playback.
A review after setting the IN and OUT points in an event
and changing the audio recording level will play back the
event from start to end. To perform a playback check only
of the section where the audio recording level was
changed, press the SEEK TO IN POINT (IN + GOTO)
button and playback will start after locating the IN point.
◆
NOTE:
• Refer to the NOTE in “Changing Audio Level in an Event during
Event Registration” (page 110).
• This method for setting the audio level is not available for a hard disk
or an external device temporarily registered as a player.
