Panasonic Aicure UD40 Series, Руководство пользователя

Страница: 39 / 52

- 39 -
*1 Shorted with common input
*2 One-shot pulse with 0.3sec or longer shorting with common input
*3 Depending on the connected LED head configuration, some pins may be disabled. (See P.41)
5) Operation of device
5. Operation by external signal
UD40 controller can be controlled by external devices by sending signals into “External I/O” connector on the back
side of control unit.
1. Pin-out and descriptions for External I/O connector (D-Sub37)
Pin No. I/O Signal name Content
1
INPUT
Local / remote switching Enable external signal control (remote control) when ON
*1
2 LED - 1 lighting Light LED head - 1 under selected program conditions when ON
*1
3 Program No. change pulse Modify program No. by one-shot ON
*2
signal.
4 Program No. bit - 0
Designate LED lighting program No.
Set program No. with total of 5 bits (32 ways).
Set program contents from touch screen.
5 Program No. bit - 1
6 Program No. bit - 2
7 Program No. bit - 3
8 Program No. bit - 4
9 LED - 1 - 1 ON Light block 1 of LED head -1 when ON
*1
10 LED - 1 - 2 ON
*3
Light block 2 of LED head -1 when ON
*1
11 LED - 1 - 3 ON
*3
Light block 3 of LED head -1 when ON
*1
12 LED - 1 - 4 ON
*3
Light block 4 of LED head -1 when ON
*1
13 LED - 1 - 5 ON
*3
Light block 5 of LED head -1 when ON
*1
14 LED - 1 - 6 ON
*3
Light block 6 of LED head -1 when ON
*1
15 Reserve input - 1 Reserve input
16 Reserve input - 2 Reserve input
17 External emergency stop - 1
Device goes to emergency stop when OPEN.
(Dry contacts independent from other signals must be used for his
signal.)
18 External emergency stop - 2
19 Common input Common for Nos. 1 to 16 and Nos.20 to 26 signals (for input)
20 LED - 2 lighting
*3
Light LED head - 2 under selected program conditions when ON
*1
21 LED - 2 - 1 ON
*3
Light block 1 of LED head -2 when ON
*1
22 LED - 2 - 2 ON
*3
Light block 2 of LED head -2 when ON
*1
23 LED - 2 - 3 ON *3 Light block 3 of LED head -2 when ON *1
24 LED - 2 - 4 ON
*3
Light block 4 of LED head -2 when ON
*1
25 LED - 2 - 5 ON
*3
Light block 5 of LED head -2 when ON
*1
26 LED - 2 - 6 ON
*3
Light block 6 of LED head -2 when ON
*1
27-28 NC Not connected. (not used.)