- 19 -
Linking to external devices
Transfer data (files) to perform nonlinear editing on another device (PC, etc.).
≥
This unit supports USB 2.0.
*1 SD cards are optional and not supplied with this unit.
*2 A USB 2.0 cable is not supplied with this unit. Use a commercially available cable compatible with the USB 2.0
standard. Connect the miniB connector to this unit.
Connect to an external monitor or an external device (such as a recorder) and output video.
*3 Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of
3 m (9.84 feet) or less.
*4 To connect to the SDI IN terminal or SDI OUT terminal, use a double-shielded BNC cable equivalent to 5C-FB
(commercially-available).
≥
When connecting in SDI Mode, it is possible to change the output method to the external device by setting
[SDI MODE SEL].
≥
The video signal of the SDI output may stop temporarily when the HDMI cable is disconnected and connected or the
connected monitor is replaced, for example.
Connection to a PC (USB connection)
A
SD card
*1
B
USB 2.0 cable (A-miniB type)
*2
C
PC
Connection to external monitor/external device (such as a recorder)
A
Camera recorder
(SDI output device)
B
Camera Head
C
HDMI cable
*3
D
BNC cable
*4
E
External monitor/
external device such as a recorder
When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI
cable to the connector of this unit last.
Connecting the HDMI cable to the connector of this unit first may result in malfunction.
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 19 ページ ２０１７年５月２２日 月曜日 午後２時１１分
