- 150 -
Frame rate
Set the frame rate for H.264 images.
Setting value:
(When [SYSTEM FREQ] is set to [59.94Hz])
5fps, 15fps, 30fps, 60fps
(When [SYSTEM FREQ] is set to [50.00Hz])
5fps, 12.5fps, 25fps, 50fps
Factory settings:
(When [SYSTEM FREQ] is set to [59.94Hz])
30fps
(When [SYSTEM FREQ] is set to [50.00Hz])
25fps
≥
When 3840
k
2160/30fps, 3840
k
2160/25fps, 1920
k
1080/60fps or 1920
k
1080/50fps is used, the setting becomes
only H.264(1).
≥
When the image resolution is “3840
k
2160” or “640
k
360”, 60fps or 50fps cannot be selected for the frame rate.
Max bit rate (per client)
*1
Specify the H.264 bit rate per client.
When [Transmission priority] is set to [Best effort], specify the maximum and minimum bit rate.
Setting value:
512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps,
12288kbps, 14336kbps, 16384kbps, 20480kbps, 24576kbps, 32768kbps
*2
, 40960kbps
*2
, 51200kbps
*2
*1 The H.264 bit rate is limited by the [Bandwidth control (bitrate)] (
) setting under the [Network] tab of the
network setup screen [Network]. The actual bit rate may be lower than the specified value.
*2 When [IP(4K)] is selected as for the [Priority Mode], this value is fixed to support the frame rate.
Factory settings:
H.264(1):
14336kbps
H.264(2):
8192kbps
The range of H.264 bit rates that can be specified varies depending on the resolution.
(When [SYSTEM FREQ] is set to [59.94Hz])
Image capture size
Frame rate
H.264 bit rate
3840
k
2160
30fps
51200kbps fixed
15fps
40960kbps fixed
5fps
32768kbps fixed
1920
k
1080
60fps
16384kbps to 24576kbps
5fps, 15fps, 30fps
1024kbps to 14336kbps
1280
k
720
60fps
3072kbps to 14336kbps
5fps, 15fps, 30fps
512kbps to 8192kbps
640
k
360
512kbps to 4096kbps
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 150 ページ ２０１７年５月２２日 月曜日 午後２時１１分
