Panasonic AG-DVX200AN, Руководство по эксплуатации

Страница: 53 / 203

- 53 -
≥ Select the [FOCUS TRANSITION] menu.
(
l 52
)
≥
Register [FOCUS TRANS] to a USER button. (
l
74 )
1
Switch to Manual Focus Mode. ( l 44 )
2
Press the USER button to which [
FOCUS TRANSITION
] is registered or touch
the applicable USER button icon.
3
Touch a registered item ([1]
s
[3]).
≥ Focus Transition will start. Focus will shift slowly from the
current position to the registered position. This will take a
few seconds. (
l 54 )
≥
As the focus shifts, the Focus Transition bar will move
from [S] to [E].
4
Touch [EXIT] to exit Focus Transition.
≥
If you move this unit a lot after setting the focus position, focus may not stop at the set position.
≥ When Focus Transition is in use, focus cannot be adjusted with the focus ring.
≥
Focus Transition is not available in the following cases:
j When Auto Focus is used
j
During Freeze Frame ( l 81 )
j In Variable Frame Rate Mode ( l 91 )
j
When color bars are displayed. ( l 95 )
j When a remote control (commercially-available) is connected ( l 113 )
≥
Focus Transition settings are canceled in the following cases. To use Focus Transition again,
register a focus position again. (
l 52 )
j
If you operate the zoom
j If you enable or disable Infrared Recording Mode
≥
You can only use the following USER button functions by pressing one of the USER buttons 5
s
8
when Focus Transition is in use ( l 74 ):
j [FOCUS ASSIST]
j
[FOCUS TRANSITION]
j [INFRARED REC]
j
[BACKGROUND]
j [PRE-REC]
j
[EVF ON/OFF]
j [AUTO REC]
j
[MENU]
Using Focus Transition
S E
 
1 2 3
MF50 MF50 MF50
A
[EXIT]
B
Focus Transition bar