- 131 -
Default scene number settings
≥
This function’s default setting is [SCENE1].
≥
It is possible to switch the scene file by touching
to
while displaying the operation icons.
(
≥
It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (
You can save the scene file settings of [CUSTOMIZE SCENE] to the SD card or load them from the
SD card to this unit. (
This enables/disables Variable Frame Rate Mode.
In Variable Frame Rate Mode, you can record quick or slow motion picture by changing the frame
rate before recording.
≥
For information on how to use Variable Frame Rate Mode, refer to page
.
≥
This function’s default setting is [OFF].
You can adjust the frame rate for Variable Frame Rate Mode.
≥
Set [VFR MODE] to [ON]. (
, above)
1
Touch [FRAME RATE].
2
Touch
/
to adjust the frame rate.
≥
You can select a value between 2fps and 120fps.
3
Touch [EXIT] to complete the setting.
≥
When the default setting for [SYSTEM FREQ] is [59.94Hz]:
This function’s default setting is “60fps”.
When the default setting for [SYSTEM FREQ] is [50.00Hz]:
This function’s default setting is “50fps”.
≥
When [REC MODE] and [REC FORMAT] are set to settings that are not available for Variable
Frame Rate Mode, [FRAME RATE] cannot be set. (
)
≥
If you set the frame rate to 100fps or 120fps, the angle of view will change. (The color of the frame
rate value will change to blue.)
[SCENE1]
Setting appropriate for standard recording
[SCENE2]
Setting appropriate for recording considering the characteristic of fluorescent lamps
(indoors, etc.)
[SCENE3]
Setting appropriate for recording with modulation in resolution, color shade, and contrast
[SCENE4]
Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5]
Setting appropriate for recording as a cinema with high contrast
[SCENE6]
Setting appropriate for recording as a cinema with high dynamic range
[SCENE FILE]
[LOAD]/[SAVE]
[VFR MODE]
[ON]/[OFF]
[FRAME RATE]
SCN1
SCN6
