background image

50 (E)

ENGLISH

Menu page P8

[PROGRAM TIMER]

P8

(TIMER)  START    END     REC-TYPE
PGM1          0:00      0:00    RT0 (   OFF

¢

16)

PGM2          0:00      0:00    RT0 (   OFF

¢

16)

PGM3          0:00      0:00    RT0 (   OFF

¢

16)

PGM4          0:00      0:00    RT0 (   OFF

¢

16)

PGM5          0:00      0:00    RT0 (   OFF

¢

16)

PGM6          0:00      0:00    RT0 (   OFF

¢

16)

PGM7          0:00      0:00    RT0 (   OFF

¢

16)

PGM8          0:00      0:00    RT0 (   OFF

¢

16)

[INTERNAL WEEKLY TIMER]
(SUN  MON  TUE   WED  THU   FRI    SAT   DLY)

¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢

¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢ ¢¢¢

PROGRAM TIMER screen

Menu item

Description of function

(TIMER)

Three items—the recording start time, recording end time and the
recording type selected for REC TYPE on menu page P3—are
combined and registered as the programme for recording to be
performed using the unit’s internal timer.
PGM1—PGM8

START

For setting the recording start time for recording to be performed
using the unit’s internal timer.
0:00—23:59

END

For setting the recording end time for recording to be performed
using the unit’s internal timer.
0:00—23:59

REC-TYPE

For setting the recording type for recording to be performed using
the unit’s internal timer.
RT0—RT7

The underlining indicates the factory mode setting.

INTERNAL WEEKLY TIMER screen

Menu item

Description of function

The programmes (max. 2) registered for (TIMER) on the PROGRAM
TIMER screen are set for the days of the week.
Select DLY when recording every day using a particular programme.

¢¢¢

, PGM1—PGM8

<Notes>

O

Set “

¢¢¢

” if no programmes are going to be registered.

O

The programme registered on the top line takes precedence.

The underlining indicates the factory mode setting.

Setting menus

Содержание AG-DTL1E





























































Отзывы: