Panasonic AAD03011, Инструкция по эксплуатации

Страница: 13 / 103

Do not install or operate an inverter that is damaged or with parts missing.
Failure to do so could lead to injury.
[Install the inverter vertically]
䊶
Areas subject to direct sunlight.
䊶
Areas subject to water or high levels
of humidity.
䊶 Areas with large amounts of oil mist,
dust or fiber dust.
䊶
Areas where rain water, water drops
or oil drops may come in contact.
䊶
Areas where corrosive gases, explosive
gases or flammable gases are present.
䊶
Installation onto flammable materials such
as wood, or near flammable materials.
䊶 Areas subject to vibration.
Installing the inverter in any other
way decreases its heat dissipation
effect and results in malfunction.
[Avoid installing the inverter in
the following locations]
Vertical Horizontal Sideways
[Make sure the ambient temperature
stays within the specifications]
The ambient temperature surrounding
the inverter will increase when it is
installed near a heating unit or housed
inside a panel. This may reduce the
life of the inverter. If you want to house
the inverter inside a panel, give careful
consideration to the cooling method
and panel size.
Space around the inverter
10cm or more
10cm or more
5cm
or more
5cm
or more
Inverter
11
Note
Installation
!
Install the unit on a non-combustible material such as metal.
Installing it on other material could lead to fire.
Do not place the unit near flammable materials.
Failure to do so could lead to fire.
Do not hold the terminal cover during transportation.
Failure to do so could cause the unit to drop and lead to injuries.
Do not allow foreign matter such as metal swarf enter the unit.
Entry of this type of matter could lead to fire.
Mount the unit according to the instruction manual in a place where
the weight can be withstood.
Failure to do so could lead to dropping of the unit and to injuries.
Tolerable ambient temperature:
-10
㷄㩷
to 50
㷄
(Ambient temperatures should be measured
at a point 5cm from the inverter.)