Panasonic Electric Works Nordic AB
MEW01295 Rev: 2
Technical Description Alert Annunciation Units 1735 & 1736, ver. 1.4.x
28
5
The
AA
unit will restart
(Restarting....)
, i.e. the buzzer will
sound for approx. two seconds and the unit will return to
normal operation.
6
Cont. from 3 above: Or press
black
push button ("P1") and
the SSD will be erased (Erasing SSD....). The
AA
unit will
restart (Restarting....), i.e. the buzzer will sound for approx.
two seconds and the unit will return to normal operation.
11.2
SW download
Each
AA
unit is equipped with an RS232 interface ("J2"), which
makes it possible to connect a PC and carry out the downloading
directly in the
AA
unit respectively.
1.
Prepare the PC and start Win512 / Win128 / Win512 G3. In
Win512 G3 select the AAU icon and click the right mouse
button. In win128 and Win512 G3, in menu "Tools" select
"Download FBP / EPU / AAU Software". Select
"Download program" and select the SW file to be
downloaded, i.e. DU_version.BIN (where "version" is the
valid program version, e.g. 14x=program version 1.4.x).
Check / set the port and baud rate. See also the Win512 /
Win128 / Win512 G3 help.
2.
Connect the PC to the
AA
unit ("J2").
3.
Put the jumpers "JP3" and "JP4" in position "A".
4.
Put the jumper "JP2" (BOOT) in position.
5.
Put the
AA
unit in "bootstrap" mode, i.e. put the jumper "JP1"
(RESET) in position
momentarily
. The buzzer will sound.
6.
Start the downloading. (The buzzer will be silenced.)
7.
When the download is ready remove the jumper "JP2" (BOOT).
8.
Put the jumpers "JP3" and "JP4" in position "B".
9.
Do a restart, i.e. put the jumper "JP1" (RESET) in position
momentarily
. The buzzer will sound for approx. two
seconds and the
AA
unit will return to normal operation.
10.
Regarding fault messages, see chapter "Restart", page 23.
Содержание 1735
Страница 2: ...This page has deliberately been left blank ...
Страница 39: ...This page has deliberately been left blank ...
