Panasat DSD 642, Руководство по эксплуатации

Страница: 9 / 33

DSD 642 OPERATING INSTRUCTIONS 9
IRDETO CRYPTOLOGY
210-250V ~ 50Hz 30W
DESIGNED AND MANUFACTURED BY UEC COMMERCIAL (Pty) Ltd
Rep. of South Africa
F
I
X
E
D
V
A
R
I
A
B
L
E
STEREO SOUND
OUTPUTS
MONO
AUDIO VIDEO
OUT
DATA SERVICE
EXTERNAL MODEM
LNB IN
LNB OUT
AUX TV
VCR
RF OUT
RF IN
L
R
SCART CONNECTOR
FLYLEAD
REAR PANEL
400 mA max.
Optional Decoder Connections
Introduction
There are several ways of connecting the decoder to an existing
audio/TV system.
The following more common examples enable you to view satellite
services and terrestrial channels, record and playback from a VCR and
listen to CD quality stereo sound.
Consult your local supplier for assistance in setting up an audio/video
configuration best suited to your requirements.
Hints to Quality TV System Configurations
#
Where possible, connect cables via audio/video outputs/inputs
(SCART or RCA) instead of RF connectors.
#
Use an appropriate, correctly installed satellite dish system.
#
Ensure that the system is properly earthed and protected against
lightning.
#
Use high quality stereo TV and Hi-Fi equipment.
#
Use high quality screened cables.
NOTE: When Video and Audio Inputs/Outputs are used, it may
be necessary to select a Video mode on the VCR and TV
in place of a TV mode.
Decoder, TV (using SCART or RF Interface)
1 As the LNB carries a small voltage on its centre connector, it is
recommended that the mains supply to the LNB is switched off
before connecting or disconnecting the LNB. Connect the
terrestrial antenna connector to the RF IN socket on the decoder.
2 Using the supplied SCART-to-SCART cable, connect the
TV SCART socket on the decoder to the SCART socket on the
TV.
3 If the TV does not have a SCART connector, use the supplied
flylead to connect the RF OUT socket on the decoder to the RF IN
socket on the TV.
4 Connect the coaxial cable connector from the LNB on the satellite
dish into the socket marked LNB IN on the decoder. The
connector on the coaxial cable should be turned until it is finger
tight.