manualshive.com logo in svg

Panasat DSD 642, Руководство по эксплуатации

Поделиться
Скачать
Panasat DSD 642 Скачать руководство пользователя страница 4

4

OPERATING INSTRUCTIONS

DSD 642

CONDITIONAL 

A

CCESS

Although some satellite TV and audio services are free to air, most  TV
and audio services are only available on a subscription basis and can
only be enjoyed via the conditional access components. These are the
removable Smart Card and a built-in  conditional access process already
fitted into the system.

Smart Card

You should have purchased a Smart Card from the dealer when you
purchased the decoder. The Smart Card looks similar to a credit card
and is inserted into the slot behind the right-hand front flap of the
decoder.

A valid Smart Card entitles you to view and listen to all the services you
choose to subscribe to. Full details of subscription options are supplied
with the card.

Your Personal Identification Number (PIN) and subscription details are
stored in the Smart Card.

Inserting the Smart Card

The Smart Card is the key to unlocking the decoder. The decoder will not
decode scrambled TV or audio services if the card is not inserted or is
incorrectly inserted.

Inserting the Smart Card into the decoder allows instant  access to all the
services you subscribe to. 

The Smart Card is not required for access to menus except for the
Parental Guidance sub-menu, which requires the PIN code  to be
entered.

The Smart Card, which is supplied separately and forms part of your
subscription, is updated over-the-air when your PIN code or subscription
details change, for instance, each time you purchase additional products
(details regarding these products will be announced in the future).

To insert the Smart Card, follow the instructions carefully.

1

Open the right hand flap on the front of the decoder (see figure)
Swing the flap downwards to expose the card slot to the right of
the row of keys.

2

Hold the Smart Card horizontally with the logo on top and the
three arrows pointed towards the front of the card. Insert the card
fully into the slot.

NOTE:

Observe the buttons next to the smart card slot,
as these can be used as an alternative interface
to the decoder.

Содержание DSD 642


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды