Panasat DSD 642, Руководство по эксплуатации

Страница: 11 / 33

DSD 642 OPERATING INSTRUCTIONS 11
Decoder, VCR (SCART Interface), TV (SCART Interface), Hi-Fi
1 Switch off the mains supply to the decoder before connecting or
disconnecting the LNB. Connect the terrestrial antenna connector
to the RF IN socket on the decoder.
2 Using the supplied flylead, connect the RF OUT socket on the
decoder to the RF IN socket on the VCR.
3 Using the flylead supplied with the VCR, connect the RF OUT
socket on the VCR to the RF IN socket on the TV
.
4 Connect the coaxial cable from the satellite dish to the LNB IN
socket on the decoder. Tighten the connector finger tight.
5 Using the SCART-to-SCART supplied cable, connect the
TV SCART socket on the decoder to the SCART socket on the TV.
6 Using another SCART cable, connect the VCR SCART socket on
the decoder to the SCART socket on the VCR.
7 Connect the VARIABLE LEFT and RIGHT HI-FI AUDIO OUT
sockets on the decoder to the LEFT and RIGHT AUDIO INPUT
sockets on the Hi-Fi.
8 Switch the power on to the decoder.
9 Set TV and VCR Scart Source and Set TV and VCR Scart Video
Output at the TV Installation menu. See page 23.