Panasat DSD 642, Руководство по эксплуатации

Страница: 12 / 33

12 OPERATING INSTRUCTIONS DSD 642
Decoder, VCR, TV, Hi-Fi (using RCA Connectors)
1 Switch off the mains supply to the decoder before connecting or
disconnecting the LNB. Connect the terrestrial antenna connector
to the RF IN socket on the decoder.
2 Using the supplied flylead , connect the RF OUT socket on the
decoder to the RF IN socket on the VCR.
3 Using the flylead supplied with the VCR, connect the RF OUT
socket on the VCR to the RF IN socket on the TV.
4 Connect the coaxial cable connector from the LNB on the satellite
dish into the socket marked LNB IN on the decoder. Tighten the
connector finger tight.
5 If the TV and VCR have AV connectors, connect as shown in the
diagram.
6 Connect the VIDEO OUT socket on the decoder to the VIDEO IN
socket on the VCR.
7 Connect the MONO AUDIO socket on the decoder to the AUDIO
IN socket on the VCR.
NOTE: If your VCR has a stereo audio input , connect the
FIXED stereo audio outputs from the decoder to the
VCR stereo audio connector.
8 Switch the power on to the decoder.