Panaconic CF-NX4E/G, Руководство по эксплуатации, Страница: 81 / 260

81
■
Starting Up
[Enter Password] does not
appear when resuming from
sleep / hibernation.
●
Select [Enabled] in [Password On Resume] in the [Security] menu
of the Setup Utility (
è
Reference Manual “Setup Utility”).
●
The Windows password can be used instead of the password set
in the Setup Utility.
A
Add a password.
1. Click
(Start) - [Control Panel].
2. Click [User Accounts and Family Safety] - [Add or remove
user accounts].
1. Display “Charm” and click - [Change PC settings] - [Ac-
counts].
2. Click [Sign-in options], and click [Add] under “Password”.
B
Set up the following.
1. Click [Control Panel] - [System and Security] - [Power Op-
tion] - [Require a password when the computer wakes] and
add a check mark for [Require a password].
1. Open the Control Panel, click [System and Security] - [Power
Options] - [Require a password on wakeup].
2. Add a check mark for [Require a password].
The computer will not
automatically enter sleep or
hibernation.
●
If you connect to a network using wireless LAN function, perform
access point settings.
(
è
Reference Manual “Wireless LAN”)
●
If you do not use wireless LAN function, turn off wireless LAN function.
(
è
Reference Manual “Disabling/Enabling Wireless
Communication”)
●
Make sure that you are not using any software that regularly
accesses the hard disk.
When logging on (e.g.,
resuming the computer),
audio is distorted.
●
Perform the following steps to change the audio settings to
prevent audio output.
A
Right-click the desktop and click [Personalize] - [Sounds].
B
Remove the check mark from [Play Windows Startup sound],
and click [OK].
A
Click the [Desktop] tile on the Start screen.
B
Right-click the desktop and click [Personalize] - [Sound].
C
Remove the check mark from [Play Windows Startup sound],
and click [OK].
Cannot resume.
●
One of the following operations may have been carried out.
•
In sleep mode, the AC adaptor or battery pack was
disconnected, or a peripheral was connected or disconnected.
•
The power switch was slid for four seconds or longer to forcibly
turn off the computer.
Slide the power switch to turn on the computer. Data not saved
will be lost.