Panaconic CF-NX4E/G, Руководство по эксплуатации

Страница: 75 / 260

75
9 Click [Next].
●
[Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After
installation, you can create a new partition. For how to create a new partition, refer to
“To change the partition structure” (
è
page 67).
●
[Reinstall Windows to the OS related partitions]
*1
Select this option when the hard disk has already been divided into several partitions.
For how to create a new partition, refer to “To change the partition structure” (
è
page
67).
*1
This does not appear if Windows cannot be installed to the partition containing boot files and
the area usable by Windows.
10 At the confirmation message, click [YES].
11
Select language and system type (32bit or 64bit), then click [OK].
At the confirmation message, click [OK].
To cancel the recovery procedure, click [CANCEL], and click the mark that appear
the top right corner of the screen.
12 At the confirmation message, click [YES].
Installation starts according to the instructions on the screen.
●
Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
13 When Ending process screen is displayed, click [OK] to turn off the
computer.
14 Turn on the computer.
●
If the password is requested, enter the Supervisor Password.
15 Perform the “First-time Operation” (
è
page 64).
NOTE
●
The date and time, and the time zone may not be correct. Be sure to set
them correctly.
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18
<Only for model with TPM> Clear TPM (
è
page 73).