Panaconic CF-NX4E/G, Руководство по эксплуатации, Страница: 63 / 260

63
NOTE
●
Note that the computer consumes electricity even when the
computer power is off. For the period of time the fully charged
battery will fully discharge, refer to “Battery duration” (
è
page
68).
●
When the DC plug is not connected to the computer, disconnect
the AC cord from your AC wall outlet. Power is consumed simply
by having the AC adaptor plugged into an electrical outlet.
2 Open the display.
Hold the side of the computer with either of your hands and
then hold and lift the (A) part to open the display.
CAUTION
●
Do not open the display wider than necessary (180° or
more), and do not apply excessive pressure to the LCD. Do
not open or close the display holding the edge of the LCD
segment.
3 Connect the computer to the AC adaptor.
The battery charging starts automatically.
CAUTION
●
Do not disconnect the AC adaptor and do not switch the
wireless switch to on until the first-time operation procedure
is completed.
●
When using the computer for the first time, do not connect
any peripheral device (including wired LAN cable) except the
battery pack and AC adaptor.
●
When an AC adaptor other than the one specified is
connected, an error notification will appear on the screen.
Always use the specified AC adaptor.
●
Handling the AC adaptor
Problems such as sudden voltage drops may arise during
periods of thunder and lightning. Since this could adversely
affect your computer, an uninterruptible power source (UPS)
is highly recommended unless running from the battery pack
alone.
4 Turn on the computer.
A
Open the display, and slide and hold the power switch
(
è
page 59) until the power indicator (
è
page 59)
lights.
A
2
3