© Pan Acoustics GmbH
V 1.1
Page 6 of 36
Operating Manual Pan Beam Series
1.4. Safety instructions
In order to prevent damage to the product, avoid
•
generating acoustic feedback.
•
playing back distorted signals at high power for a prolonged period.
•
generating impulse-like sounds (e.g. popping noises), which occur if a media player is switched
on, connected or disconnected.
•
connecting the product to the power supply for a prolonged period without using it.
•
operating the device in environments with high air humidity.
•
operating the device without suffi cient possibility of air circulation.
Device protection and operating safety
•
The device is completely disconnected from the power supply by pulling the power plug.
•
The device is only to be cleaned from the outside using a dry cloth.
•
The original packaging should be used when transporting the device. The device is to be
protected against vibrations.
All products from Pan Acoustics are developed and manufactured in Germany according to the
latest safety regulations. Each product is thoroughly inspected prior to shipping according to
in-house quality guidelines.
The device conforms to the current CE regulations for operation in residential, business, commercial
and industrial areas.
The device is to be carefully inspected upon receipt for shipping damage and completeness. In case
of damage, the forwarder and sender are to be notifi ed without delay.
Safety may be impaired if the product:
•
shows signs of visible damage.
•
no longer works properly.
•
has been stored under adverse conditions for a prolonged period.
•
has been improperly shipped (e.g. unsuitable packaging).
If the product shows signs of impairments that no longer guarantee safe operation, the device is
to be secured and labeled accordingly. It should also be ensured that no intentional or inadvertent
operation by third parties is possible.
