![Pan Acoustics PB 04 Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/pan-acoustics/pb-04/pb-04_operating-and-installation-manual_750305017.webp)
© Pan Acoustics GmbH
V 1.1
Page 17 of 36
Operating Manual Pan Beam Series
6.4. DANTE
6.4.1. Setup
The speakers in the Pan Beam series
are to be set up through the Pan Beam
Setup software. The Audinate software
DANTE Controller is to be installed for
software access to DANTE network. After
successful installation, the DANTE
interface appears in the bottom line of
the Pan Beam Setup software.
The DANTE controller can be launched
via the "Interface" menu item in the Pan
Beam Setup program.
The DANTE Controller software in its
latest version must be properly installed.
Link for download: http://www.audinate.com
6.4.2. Routing
A Pan Beam speaker appears in the DANTE
network under the “DANTE Receivers”
tab. The speaker features two inputs,
Input A and Input B.
For audio routing, the relevant connection
is to be set between the desired DANTE
transmitter and the Pan Beam speaker.
Via the Pan Beam Setup software, the
relevant audio source is also to be
activated (Input A and/or Input B).
6.4.3.
Device Confi g
The DANTE interface allows to adjust
various settings of the Pan Beam speakers
via the “Device Confi g” tab.
Rename device
:
Assign name for the speaker
Sample rates
:
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
Encoding
:
Pan Beam speakers support
PCM24 and PCM32 encoding
Device latency and clocking
See Audinate Dante information at
http://www.audinate.com