manualshive.com logo in svg

Pan Acoustics PB 04, Руководство по эксплуатации и установке

Поделиться
Скачать
Pan Acoustics PB 04 Скачать руководство пользователя страница 11

© Pan Acoustics GmbH   

 V 1.1    

Page 11 of 36

Operating Manual                                                                                                 Pan Beam Series 

All  audio  and  power  supply  connections  are  located  on  the  back  panel  of  the  speakers. 

The connections are freely accessible, --

> see chapter 3. "Connections"

.

For the power supply, the power connection of the speaker is to be made to an appropriate power 

source using the included power cord.

The connection for audio signals and control data is established via the RJ45 connector sockets.

4. Commissioning
4.1. Electrical connections

In order to prevent electrical shock, the modules are only allowed to be connected to one another 

when the power is switched off.

When joining the modules, the inside cable assembly is to be fed into the interior of the speakers. 

Avoid crushing and bending the cables.

4.2. Mounting of speakers, consisting of several modules

The PB 16, PB 24, PB 32 and PB 40 speaker systems consist of two or more modules. The PB 16 

consists  of  a  “bottom”  and  “top”  module.  The  PB  24,  32  and  40  feature  additional  intermediate 

(“middle”) modules. The power and signal supply is provided via an internal cable assembly with 

appropriate plug connectors. The mechanical connection of the individual modules is completed via 

connector elements that are inserted into the lateral slots.

1

2

3

Insert  the  narrow  connectors 

into the lateral slot.

Secure  the  connectors  using 

screws (left and right).

Insert the wide connector into 

the rear slot.

4

5

6

Secure  the  connector  using 

screws.

Connect the power and signal 

plug connectors.

Join  the  modules  and  secure 

them with screws.

T

o prevent malfunctions, the recommended bending radius of the power and signal connection cables 

is to be observed.

Содержание PB 04





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды