22
•
Are all required tools and auxiliary equipment available? Are any
another special tools required?
•
Do cut-outs have to be made for the lifting mechanism?
•
Should a seal be installed in vehicles with a box body without rear
doors? If this is the case, the platform must be set at a distance
(procedure: see note on page 37).
•
Is the use of trailers planned? If yes, sufficient space for the trailer
coupling must be available and the free movement of the drawbar must
be ensured.
When all these points have been checked off, you can start with the
assembly or pre-assembly (for PTC 750 L - PTC 1000 LLW) of your
PALFINGER Tail Lifts
tail lift. Assembly consists of several steps, which are
described in more detail on the following pages. They include:
•
preparation of vehicle or vehicle chassis (see chapter 6, page 23)
•
pre-assembling/assembling lifting mechanism (see chapter 7, page 27)
•
establishing electrical connections (see chapter 8, page 46)
•
installing and connecting the platform (see chapter 9, page 53)
•
adjusting and testing the platform (see chapter 10, page 63)
