12
2.3.3. During assembly
►
When connecting the hydraulic parts, ensure that the connections are
clean and that no contamination can get into the hydraulic circuit.
►
Make sure that the
PALFINGER Tail Lifts
tail lift and its moving parts, the
coupling, the brake system, the oil lines, the pneumatic lines and the
cabling of the vehicle are not damaged.
►
Do not apply any overpressure to the functions lift/lower, open/close,
retract or extend before the assembly is entirely completed.
2.3.4. During initial commissioning
►
Only operate the tail lift when the vehicle's superstructure is fitted. If you
operate the tail lift without its body, there is a risk that the pistons of the
lift cylinders will fall out if the lifting height is too high, resulting in personal
injury and material damage.
►
During initial commissioning of the
PALFINGER Tail Lifts
tail lift, check
whether all safety and warning features are available and functional.
•
Warning strips
•
Warning lights
•
Roll bar
►
Carry out an acceptance test according to the test book (see chapter 11.2,
page 75).
