37
Note:
When attaching a plastic-coated platform:
►
Place 2 mm plates between the control rods of the torsion frame and
the superstructure as spacers (see Figure 16).
This is necessary because otherwise the platform will stand too high after
assembly.
When attaching a sealing system to the box body:
►
Place 25 mm spacers between the control rods of the torsion frame and
the superstructure.
This is necessary so that there is enough space for the sealing system
between the superstructure and the closed platform.
Figure 16: 2 mm spacer plates for assembly of a coated platform
►
Check that the lifting mechanism is exactly centred at the sides (see
Figure 17 and Figure 18, page 38).
Installation aid
Rear cross-
member
Control rod
Pin
2 mm plate
