Palazzetti V15, Руководство по установке и обслуживанию

Страница: 68 / 196

68 004779194 - 14/03/2023
6) In the event that the domestic system is
equipped with a manual or automatic top-up
system, the appliance can be loaded through
the flow and return pipes. To achieve this:
• Open the relief valve ( C ) ( Fig. 34 ) and open the
bypass tap in the anti-condensation valve ( F ), to
allow the water to flow until the boiler is com-
pletely full ( Fig. 35 ). Close the relief valve and
wait for the minimum operating pressure to be
reached ( 1 bar ), which can be checked on the
pressure gauge ( G ) ( Fig. 37 ).
• Close the bypass tap present in the anti con-
densation valve ( Fig. 36 ).
Fig. 36
G
Fig. 37
• Close the filling tap ( E ).
• Check that all the fittings are perfectly sealed.
7.5.2 System emptying:
1) Connect a rubber hose to the system drain ( H )
and open it, then open the relief valve to allow
the water to flow until the appliance is com-
pletely empty. Close the relief valve and the
tap ( Fig. 38 ).
H
Fig. 38
7.6 Electrical connection
Simply connect the appliance to the electrical
system using the supplied plug ( Fig. 39 ).
The electrical connection (plug) must be easily
accessible after appliance installation as well.
If the power supply cable is damaged
it must be replaced by the technical
assistance service or a qualified techni-
cian in order to prevent any risk.
Fig. 39
The system must be equipped with
an earth connection and a differential
switch in compliance with the laws in
force.
The flue gas evacuation duct must
be equipped with its own earth
connection.