Palazzetti V15, Руководство по установке и обслуживанию

Страница: 77 / 196

ITALIANO ENGLISH FRANÇAIS
004779194 - 14/03/2023 77
DEUTSCH ESPAÑOL
• Then remove the screws (B) , access the inner
chamber and vacuum any residues.
B
Fig. 56
• Remove the screws (C) and remove the covers
to access the manifolds ( Fig. 57 )
C
Fig. 57
• Use a flexible brush to clean the exchanger
pipes in the combustion chamber ( Fig. 58 )
• Remove any residues that fall in the flue mani-
fold using an ash vacuum.
Fig. 58
Vacuum the residual ash Fig. 59 .
Fig. 59
• Re-fit all the components in reverse order.
• Check the condition and tightness of all the
seals.
• Check the condition of all internal components
and make sure they are clean.
• Make sure the flue gas outlet connection is
sealed and clean.
• Remove any deposits of pellet residues in the
hopper.
• Check the correct operation of the appliance.
• Reset any warnings or alarms (the manual re-
set thermostats are on the rear of the appliance
near the power cable).