Palazzetti PIATTAFORMA T3, Руководство по установке и обслуживанию, Страница: 80 / 128

80
004778003
-
21/02/2023
Using an ash vacuum can simplify the cleaning operations
The images in the following paragraphs are purely indicative.
10.3 Ordinary cleaning - static burn pot
10.3.1 Cleaning the inside of the firebox
Daily or before each ignition, it is necessary to check that the burn pot is clean to ensure the free flow of
combustion air from the holes of the burn pot itself.
Vacuum the ash accumulated in the burn pot (
Fig. 48 ).
Remove the ash from the combustion chamber as the salts present cause corrosion of the metal.
In addition, the ash could block the passage of air, varying the development of the flame which,
if it approaches the glass, would increase corrosion.
After cleaning the burn pot, remove it from its housing and clean the space where it is contained.
If necessary, remove the ash drawer and empty it, making sure to remove any residue in the compartment
where it is contained ( Fig. 49 ).
Fig. 47
Fig. 48
Fig. 49