Palazzetti PIATTAFORMA T3, Руководство по установке и обслуживанию, Страница: 70 / 128

70
004778003
-
21/02/2023
7 INSTALLATION
7.1 General considerations
The following sections provide a number of indications to be complied with in order to obtain the maximum per-
formance from the purchased product.
The following indications are however subject to compliance with any possible national, region-
al and municipal laws and regulations in force in the country where the appliance is installed.
7.2 Upper outlet installation configuration
It is possible to install the stove in different ways according to personal requirements:
•
Coaxial pipe
• Single-wall pipe and air intake in room
• Single wall pipe and air intake connected to the outside
7.2.1 Coaxial pipe
It is possible to use a coaxial pipe to expel the flue
gases and simultaneously recover the combustion
air since the stove has already a factory configura-
tion for this type of installation
While it is understood that it is the technician’s re-
sponsibility to properly size the chimney flue based
on the installation situation and the product, it is
nonetheless advisable not to exceed a length of 7
metres with an 8/13 cm coaxial pipe. “Fig. 29”
7.2.2 Single-wall pipe and air intake in room
In this case the combustion air will be taken from
the room.
To achieve this:
• Connect the flue gas outlet pipe
(A) ( “Fig. 30” ).
D
Fig. 29
A
Fig. 30