Palazzetti PIATTAFORMA T3, Руководство по установке и обслуживанию, Страница: 53 / 128

ENGLISH
53
004778003
-
21/02/2023
• feed the appliance only with fuel having the characteristics described in the section
“
Fuel characteristics
” ;
• Do not use solvents, acids, aggressive detergents or products to directly clean the
glass or other components of the product;
• avoid leaving the product in unfavourable ambient conditions (humidity, airborne
salinity, storms, etc.);
• if the appliance is not used for long periods (e.g. during the summer), disconnect
the combustion air inlet pipe and place dessicant bags in the combustion chamber
to absorb the humidity in the air, making sure to remove them when the product
is re-ignited.
3 FUEL CHARACTERISTICS
3.1 Fuel characteristics
The pellet ( Fig. 3 ) is a compound made from various types of wood pressed together with mechanical
procedures in compliance with environment protection regulations, and it is the only fuel required for this
type of appliance.
The efficiency and thermal potential of the appliance may vary according to the type and quality of the
pellets used.
We recommend the use of class A1 pellets (ISO 17225-2 stand-
ard, ENplus A1, DIN Plus or NC 444 category “High Perfor-
mance NF Pellets Biofuel Quality”).
Use pellets with standard length between 3 and 40
mm.
Using poor quality pellets or pellets that do not comply
with the manufacturer’s indications may compromise
the normal operation of the appliance, cause damage
(including aesthetic damage) to the product and
result in the warranty being voided.
It is prohibited to use the appliance as an incinerator
to burn rubbish.
The appliance is equipped with a pellet storage tank having the capacity indicated in table “ Technical
features”.
The loading compartment is positioned at the top, it must always be open for loading of the pellets and
must remain closed while the appliance is operating.
Once a month it is preferable to completely use up the pellets in the tank to eliminate the
quantity of fuel dust.
3.2 Pellet storage
Pellets must be kept in a dry place, not too cold and the bags must be kept sealed.
It is advisable to keep a number of bags of pellets in the room where the appliance is being used or in an
adjacent room provided it is at the correct temperature and humidity and at a safe distance (at least one
meter) away from heat sources.
Wet and/or cold pellets (5 °C) reduce the thermal potential of the fuel resulting in the need for more
cleaning maintenance of the burn pot (unburned material) and of the fire box.
Fig. 3