20
Palax D410 Pro+
Translation
1-2020
Mechanical control of the Palax D410 Pro+
Figure 10
Lever A for hydraulic operation of the clamp
The clamp automatically keeps the tree in position during the crosscut operation, controlled by
the joystick C.
The manual operating lever is required for relieving pressure from the clamp for feeding in small
or lightweight trees or reversing on malfunction.
Lever B for starting and stopping the splitting operation
Normally, the splitting operation starts and stops automatically.
The manual lever is required in case of malfunction or for launching the splitting of the last log.
Joystick control C
Lever D for hydraulic operation of the splitting wedge
Using this lever, the splitting wedge can be lifted or lowered as required by the size of the log.
