Palax D410 Series, Инструкция по эксплуатации

Страница: 11 / 43

11
Palax D410 Pro+ Translation 1-2020

Only cut one log at a time.

Danger! Stay away from moving parts.
Noise emission and vibration

Equivalent continuous A-weighted sound-pressure level at the workstation is 89.5 dB (A) and
the sound power level is 100.5 dB (A).

The vibration emission values do not exceed the limit 2.5m/s
2
.
Responsibilities of the operator

The machine may only be used to produce firewood.

All the safety-related devices are necessary to ensure a sufficient level of safety.

The Palax D410 Pro+ is a very safe machine provided that the given instructions are properly
followed during the operation, the regular maintenance routines are duly executed and the
work is carried out without haste.

It is the responsibility of the operator to ensure before the work is started that all the safety-
related devices are in perfect order and the machine has been serviced properly.

The operator is responsible for ensuring that no one else is subjected to any danger.

The structure of the machine must not be modified.

The machine must never be operated under the influence of alcohol or drugs.

Remember that as the operator you are responsible for any injuries caused if safety-related
devices have been removed from the machine.
Operating conditions

Always place the machine on as level a position as possible.

Prevent risks, such as slipping in winter, by organising the work site in a due manner.

Otherwise the weather conditions do not set any restrictions on the operation. When starting
the machine in severe frost, allow it to idle at about 1/4 of the maximum speed for about 5 to
10 minutes.

Only operate the machine in an adequately lit space.

It is recommended that a suitable stand be purchased or made that enables the trees to be
processed where the logs are ready at the level of the in-feed deck. Hence, unnecessary lifting
may be avoided and the work can proceed much faster. We recommend using either the Palax
Midi log-deck or the Palax Log log-stand.

The most suitable temperature range for operation is approximately -20 to +30 degrees
Centigrade. Otherwise, the weather conditions do not set any restrictions on the operation.

Make sure that no other people, especially children, are present inside the operating range.

Never use the machine indoors due to the risk of dust generation or emissions of exhaust gases.