23
Palax D410 Pro+
Translation
1-2020
In-feed conveyor
The hydraulically driven in-feed conveyor is 200 mm wde and 2,200 mm long.
The drive and return rollers of the in-feed conveyor are equipped with scrapers A, Fig. 15,
which keep the rollers clean at all times. For example, in winter snow does not pack on the
rollers.
The travel path of the belt can be changed and the belt can be made to run straight by means
of the adjustment screw B located at the saw-bar end of the in-feed conveyor. Fig. 16
NOTE!
The in-feed conveyor belt is a wear part, but using it in the correct way, increases its
service life considerably.
How to use the belt
Do not pull trees from the ground using the belt, because the belt wears quickly if it slips
under the tree.
Stop the in-feed operation immediately as soon as the tree comes in contact with the log-
stop.
Use a log-stand equipped with freely rotating rollers or hydraulic operation to make handling
of the trees easier.
Always keep the belt at a suitable tightness.
Figure 14
Figure 15
