10
3.17
If the AC mains power fails during operation, the charger will shut-down
safely; no damage will occur to either the charger or the batteries. When the
mains power is restored the charger will default to the main charge program.
3.18
PL16 Chargers, Models 9707 & 9707A feature a built-in
Camera Power Supply
that enables you to power your camera from an AC mains supply, using the
charger. Connection to the camera can be made using an XLR4 male to female
adaptor lead (PAG Model 9450). The power supply is operated by pressing the
button on the front panel of the charger, and holding it in for 1 second.
The blue LED above the button will light to indicate the power supply is in
operation. When the camera power supply is in use, charging is suspended
4.1
WARNING: To reduce the risk of electric shock, do not attempt any servicing or
repairs unless you are qualified to do so. Refer all servicing or repairs to
qualified servicing personnel. The charger contains advanced electronics that do
not require periodic maintenance. Consequently there are no user-serviceable
parts inside.
4.2
Qualified electronics engineers who wish to gain access to internal assemblies
should note that parts of the power circuit retain a high voltage even after the
power supply has been disconnected. Wait for a period of five minutes following
disconnection before commencing disassembly, and be aware of charged
capacitors.
4.3
When the charger is correctly connected to an AC supply and the display is not
functioning, it may be that a supply fuse has become open circuit. Equipment for
use in the UK is supplied with a standard AC power lead, complete with a
moulded, fused plug. If this fuse has become open circuit it should be replaced
by another of the correct rating (see Specification Section 2.11). USE ONLY A
FUSE OF THE CORRECT RATING. If the replacement of the fuse fails to correct the
above symptoms, do not attempt further fuse replacement, it is likely that a
fault has developed. Contact your nearest authorised PAG Service Centre:
PAG America:
Tel: +1 631 300 8215, Email: [email protected]
PAG UK:
Tel: +44 (0)20 8543 3131, Email: [email protected]
If you are located outside the US and the UK please visit
www.paguk.com/
agents
to discover your nearest point of contact.
SERVICING OR REPAIRS
SECTION 4
