OPERATING INSTRUCTIONS
SECTION 3
3.1
PAGlink PL16 Chargers are fitted with an AC input socket conforming to CEE22
(IEC socket). AC supply connection to the charger should be made using only
the standard lead supplied with this equipment.
3.2
PAGlink PL16 Chargers have been designed for use on AC supplies worldwide,
and automatically accept supplies in the range 100V to 265V. AC supply
frequency must be in the range 50-60Hz.
3.3
IMPORTANT: Note section 3.17 Supply Failure. PAGlink PL16 Chargers may be
disconnected from the supply at any time in complete safety and without
damage to the charger or any batteries connected.
3.4
Connect the charger to a suitable supply using the standard lead. The red LCD
screen will illuminate.
3.5
On power-up, the charger will automatically run a self test program.
3.6
With no batteries connected, the display will indicate ‘ABST’ on each channel:
PL16 Display
PL16+ Display
3.7
When batteries are connected, charging will automatically commence and the
charger display will indicate ‘CHRG’ on the appropriate channels:
PL16 Display
PL16+ Display
3.8
Up to 8 PAGlink batteries per channel may be charged. Batteries can be
in any state of charge. The most-discharged batteries will be given a higher
charge priority. The charge status of each PAGlink battery is indicated by its
own display. Fully-charged batteries stop accepting charge automatically and
independently of other batteries.
8
