PACOM PNVR32-RMT, Руководство пользователя, Страница: 45 / 160

Network Video Recorder
37
 Disable Desktop Window Manager (DWM) : Disables Desktop Window Manager (DWM) that runs
Windows Aero. Disabling DWM is recommended if video often freezes when multiple monitors are used.
 Dynamic Multistream Control : Allows you to use a different stream depending on the screen format
(supported only for devices in which more than one stream is used). Selecting Auto allows the SiRiS
program automatically to choose the proper stream based on the screen format.
 Interactive Bandwidth Control : Controls the network bandwidth by automatically adjusting the
resolution and the frame rate of the device depending on a screen format (1x1 screen format: the maximum
resolution and frame rate supported by the device, Multi-screen format: the resolution and frame rate
decreased to an appropriate level for each screen format). This function enhances the network bandwidth
efficiency and decreases a drop in performance of the Client system which might be caused by the network
congestion. For this function to work, the device must be also set up to use the function. This function
works only for monitoring video.
Log List
 Number of results displayed on the list : Set
up the number of log entries to be displayed at
once (in the case of
Device Log , maximum
100 logs at once regardless of the setting).
 Update Interval : Set up the status update
interval in the Device Check panel.
Instant Event
 Time Range : Set up the length of time for an
event notification to be displayed in the Instant
Event List after notification of the event detection
(If the event list has 100 or fewer items, the event
list will remain on the Instant Event List even
if the length of time has expired).
 Column : Select the information to be displayed
in Instant Event List.
 Callback Port : Set up the port number to receive
a callback message from the device. This setting
will be used only when the monitoring service
does not run. The NVR system uses the callback
port of the monitoring service, which is set in the
Service Manager program when the monitoring
service runs. The port number you enter should
match the port number set on the device for
remote callback.
 Live Text-In Time Range : Set up the length of time for a text-in data to be displayed when a text-in
event occurs. You can check the text-in data in the text-in viewer window within the time range since
the text-in event occurred. Refer to
4.3 Controlling Cameras , Text-In Viewer (p. 53) for details about
the text-in viewer window.