PACOM PNVR32-RMT, Руководство пользователя

Страница: 43 / 160

Network Video Recorder
35
Screen Format
 Side Pane Position, Map Sitemap Position :
Set up the position of side panels and the position
of the root map list in the Map panel.
 Monitor Setup… : Set up the monitor connected
to the NVR system. Do NOT update the device
driver of the display adaptor when setting up the
monitor. The system might not operate properly
when doing it.
 Live Default , Playback Default Map Default :
The default screen formats for the Live, Play and
Map screens are displayed. Clicking the
Format
Setup
button allows you to change the default
screen format.
 Change the screen format based on the
selected camera : Displays video from a camera
selected from the current screen format in the
first camera screen of the new screen format
when you change screen formats.
Screen Display
 Display OSD
: Sets up the OSD display setting
and information to be displayed on a camera
screen. The
Opacity slide bar allows you to
adjust the opacity of OSD (On Screen Display),
OSD Magnification changes the OSD size
depending on the screen size. See below about
OSD information.
− Camera Title : Displays the camera name
set in the SiRiS program.
− Title Bar : Separates the title display area
from an image display area at the top.
− Status Icon
: Displays status OSD. (
(Red): During Time-Lapse or Event-Based
recording, (Orange): During Instant
recording, (Purple): In the PTZ mode, :
In the camera sequence mode, : In the zoom
mode, : In the two-way audio
communication mode)
− PTZ : Displays direction control buttons which is displayed on the camera screen when controlling
a PTZ camera.
− Date
,
Time
: Displays the date and time of the NVR system.
− Event Alert , Event Alert Dwell Time : Highlights the camera title bar in red when an event occurs in
the device. The alert will release after the event dwell time (sec.) from the time an event is detected or
when you select the camera screen if you set up the Event Alert Dwell Time setting to
Manual Off .
− Motion Block : Displays the area where motion is detected with red blocks when a motion detection
event occurs in the device (supported only for network video transmitters which use the SiRiS protocol).
− Site Name
: Displays the device name. This will be displayed only when the device name is different
from the camera title.