PACOM PNVR32-RMT Скачать руководство пользователя страница 11

Страница: 11 / 160

Network Video Recorder

⑦

DVI:

Connect a PC monitor. Connect a monitor before turning on the system. Video might not be

displayed on the monitor when connecting a monitor after turning on the system. Refer to

3.3 Client,

Menu – Preference Settings, Screen Format

(p. 35) for details about the monitor setting.

⑧

D-Sub:

Connect a PC monitor. Connect a monitor before turning on the system. Video might not be

displayed on the monitor when connecting a monitor after turning on the system. Refer to

3.3 Client,

Menu – Preference Settings, Screen Format

(p. 35) for details about the monitor setting.

NOTE:

The location of DVI and D-Sub connectors is subject to change without notice.

1.4 Front Panel

①

Power Button:

Turns on or off the system.

②

Power LED:

Is lit when the unit is turned on.

③

HDD LED:

Flickers when the unit accesses to the hard disk drive.

④

DVD RW:

Used to save the recorded data on the CD-RW or DVD RW media.

⑤

USB Port:

Connects the USB devices.

NOTE:

Windows may not operate properly when using the USB connectors on the front panel of the unit,

depending on the model type of the USB device. In this case, connect the USB device after Windows boots
properly or use the USB connectors located on the rear panel.

1.5 Upgrade

You can upgrade the NVR system by using a USB flash drive as follows:

NOTE:

Upgrading by using a USB flash drive is supported for the users belonging to the default user group

(

Administrators

Connect a USB flash drive containing the upgrade package file to the NVR while the SiRiS Client program
is running.

Click

SiRiS Update

under the

System

Menu in the NVR system. The following window appears.

Содержание PNVR32-RMT

































































































































































Результаты поиска

Содержание PNVR32-RMT

Отзывы:

PACOM PNVR32-RMT, Руководство пользователя, Страница: 11 / 160

Результаты поиска

Содержание PNVR32-RMT

Отзывы: