Packard Bell EasyNote LJ75 Скачать руководство пользователя

Страница: 161 / 222

Chapter 4

151

Click

Ensure that the software used for burning discs is the factory default. If using different software, refer to
the software's user manual.

Playback is Choppy

If playback is choppy or jumps, perform the following actions one at a time to correct the problem.

Check that system resources are not running low:

Try closing some applications.

Reboot and try the operation again.

Check that the ODD controller transfer mode is set to DMA:

Navigate to

Start

Control

Panel

System

and

Maintenance

System

Device

Manager

Double-click

IDE ATA/ATAPI controllers

, then right-click ATA Device 0.

Click

Properties

and select the

Advanced

Settings

tab. Ensure that the

Enable

DMA

box is

checked and click

Repeat for the other ATA Devices shown if applicable.

Drive Not Detected

If Windows cannot detect the drive, perform the following actions one at a time to correct the problem.

Restart the computer and press F2 to enter the BIOS Utility.

Check that the drive is detected in the

ATAPI Model Name

field on the Information page.

NOTE:

Check that the entry is identical to one of the ODDs specified in “Hardware Specifications and

Configurations” on page 17.

Turn off the power and remove the cover to inspect the connections to the ODD. See “Disassembly
Process” on page 50.

Check for broken connectors on the drive, motherboard, and cables.

Check for bent or broken pins on the drive, motherboard, and cable connections.

Try an alternate cable, if available. If the drive works with the new cable, the original cable should be
replaced.

Reseat the drive ensuring and all cables are connected correctly.

Replace the ODD. See “Disassembly Process” on page 50.

Drive Read Failure

If discs cannot be read when inserted in the drive, perform the following actions one at a time to correct the
problem.

Remove and clean the failed disc.

Retry reading the CD or DVD.

Test the drive using other discs.

Play a DVD movie

Listen to a music CD

If the ODD works properly with alternate discs, the original disc is probably defective and should be
replaced.

Turn off the power and remove the cover to inspect the connections to the ODD. See “Disassembly
Process” on page 50.

Check for broken connectors on the drive, motherboard, and cables.

Check for bent or broken pins on the drive, motherboard, and cable connections.

All manuals and user guides at all-guides.com

all-guides.com

Содержание Bell EasyNote LJ75































































































































































































































Результаты поиска

Содержание Bell EasyNote LJ75

Отзывы:

Похожие инструкции для Bell EasyNote LJ75

Бренды по названию

Популярные бренды

Packard Bell EasyNote LJ75, Руководство по обслуживанию

Результаты поиска

Содержание Bell EasyNote LJ75

Отзывы:

Похожие инструкции для Bell EasyNote LJ75

Бренды по названию

Популярные бренды