Packard Bell EasyNote LJ75 Скачать руководство пользователя

Страница: 160 / 222

150

Chapter 4

•

LED does not flash when the computer starts up

•

The tray does not eject

•

Access failure screen displays

•

The ODD is noisy

Perform the following general solutions one at a time to correct the problem.

Reboot the computer and retry the operation.

Try an alternate disc.

Navigate to

Start

Computer

. Check that the ODD device is displayed in the

Devices

with

Removable

Storage

panel.

Navigate to

Start

Control

Panel

System

and

Maintenance

System

Device

Manager

Double-click

lDE ATA/ATAPI controllers

. If a device displays a down arrow, right-click on the device

and click

Enable

Double-click

DVD/CD-ROM drives

. If the device displays a down arrow, right-click on the device and

click

Enable

Check that there are no yellow exclamation marks against the items in

lDE ATA/ATAPI controllers

. If

a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver.

Check that there are no yellow exclamation marks against the items in

DVD/CD-ROM drives

. If a

device has an exclamation mark, right-click on the device and uninstall and reinstall the driver.

If the exclamation marker is not removed from the item in the lists, try removing any recently installed
software and retrying the operation.

Discs Do Not Play

If discs do not play when inserted in the drive, perform the following actions one at a time to correct the
problem.

Check that the disc is correctly seated in the drive tray and that the label on the disc is visible.

Check that the media is clean and scratch free.

Try an alternate disc in the drive.

Ensure that

AutoPlay

is enabled:

Navigate to

Start

Control

Panel

Hardware and Sound

AutoPlay

Select

Use AutoPlay for all media and devices

In the Audio CD and DVD Movie fields, select the desired player from the drop down menu.

Check that the Regional Code is correct for the selected media:

IMPORTANT:

Region can only be changed a limited number of times. After Changes remaining reaches zero,

the region cannot be changed even Windows is reinstalled or the drive is moved to another computer.

Navigate to

Start

Control

Panel

System

and

Maintenance

System

Device

Manager

Double-click

DVD/CD-ROM drives

Right-click

DVD drive

and click

Properties

, then click the

DVD Region

tab.

Select the region suitable for the media inserted in the drive.

Discs Do Not Burn Properly

If discs can not be burned, perform the following actions one at a time to correct the problem.

Ensure that the default drive is record enabled:

Navigate to

Start

Computer

and right-click the writable ODD icon. Click

Properties

Select the

Recording

tab. In the

Desktop disc recording

panel, select the writable ODD from the

drop down list.

All manuals and user guides at all-guides.com

Содержание Bell EasyNote LJ75































































































































































































































Результаты поиска

Содержание Bell EasyNote LJ75

Отзывы:

Похожие инструкции для Bell EasyNote LJ75

Бренды по названию

Популярные бренды

Packard Bell EasyNote LJ75, Руководство по обслуживанию

Результаты поиска

Содержание Bell EasyNote LJ75

Отзывы:

Похожие инструкции для Bell EasyNote LJ75

Бренды по названию

Популярные бренды